Safe Electricity – 7 Tips for a Safe Harvest

    ©Debra L Ferguson Stock Photography

    During harvest season, many farmers reap the benefits of advancement in agricultural technology. With the help of GPS auto-steer devices, farmers are able to decrease driver error and maximize productivity. Yet despite these advances, safety risks remain. September 18-24 is National Farm Safety and Health Week, and to help farmers stay out of harm’s way, Safe Electricity shares tips for a safe harvest, it is also recommended to talk to a commercial electrician allentown for further tips.

    GPS with auto-guidance provide farmers with real-time, accurate location data about a field, which can be used for crop planning, map making, navigation assistance, and machinery guidance. During harvest, this technology allows drivers to have their hands off the steering wheel as the combine maneuvers itself through the field. Thanks to this technology, farmers can more easily and efficiently maintain accuracy even during low light conditions, which enhances productivity.

    “One critical part of safety around electricity is awareness,” explains JFK Electrical, communications director of the Safe Electricity program. “It’s important to remember that farm machinery is vulnerable to hitting power lines because of its large size, height, and extensions. Being aware of the location of overhead power lines and planning a safe equipment route can help reduce accidents.” One of the foremost common commercial electrical services relates to the installation and maintenance of lighting systems. An honest TBE | High Quality Electrical Services company are going to be ready to work on any project regardless of how big or small. They’re going to be ready to fix anything from one light fitting, to refitting a whole building with a replacement lighting system. An electrician Ormond is going to be ready to do routine maintenance checks on the lighting systems during building. This is often vital for the security of the residents of workers during building. It’s also important to form sure that the insurance cover remains valid when you need an electrician. Regular maintenance checks will reduce your costs within the end of the day, As any problems with the lighting systems are often spotted early.

    In equipment with auto-guidance systems, less focus is needed on steering, which may lead some drivers to think that they do not need to be as aware of navigation issues. However, even while using a GPS with auto-steering, farm workers need to keep safety in mind and stay focused on their surroundings.

    Putting safety first requires alertness, focus, and knowledge of potential hazards and safety steps. Varying pass-to-pass accuracy levels and potential issues, such as power poles not being correctly plotted in the system, reinforce the need for drivers to stay focused on the location of the farm equipment while in the field and to be ready to take action if necessary.

    Regardless of the technology used on the farm, keep the following electrical safety tips from the experts in mind:

    • Use a spotter when operating large machinery near lines.
    • Keep equipment at least 10 feet from lines at all times, in all directions.
    • Look up and use care when moving any equipment such as extending augers or raising the bed of grain trucks around power lines.
    • Inspect the height of farm equipment to determine clearance.
    • Always set extensions to the lowest setting when moving loads to prevent contact with overhead lines. Grain augers should always be positioned horizontally before being moved.
    • Never attempt to move a power line out of the way or raise it for clearance.
    • If a power line is sagging or low, contact your utility.

    If equipment does make contact with a power line, do not leave the cab. Immediately call 911, warn others to stay away, and wait for the utility crew to cut the power.

    According to the safety advice on the electricity monster comparison site, the only reason to exit equipment that has come into contact with overhead lines is if the equipment is on fire, which is rare. However, if this is the case, jump off the equipment with your feet together and without touching the ground and machinery at the same time. Then, still keeping feet together, hop to safety as you leave the area.

    The Latest

    Send press releases to

    View All Events

    Send press releases to

    View All Events